Post Set 1

With our Portable Measuring Arm, we are capable of scanning and probing large parts in clamped or free state positions in order to inspect the surface profiles, the true positions of the holes, the trimmed edge lines, and all other GD&T callouts. We can also analysis the twist in the parts by measuring and generating […]

Precision Measurement and Design is registered under Controlled Goods Program (CGP). This effort was taken in order to satisfy our customer’s metrology needs for their controlled products. We can now perform CMM measurement and Laser Scanning on parts that are under Controlled Goods List in North America.#CGP #automotive #design #manufacturing #aerospace #cmm #scanning

The portable 3D scanner is capable of performing fast and accurate measurement on different types of parts regardless of the material or the gloss rate. When we scan the parts surfaces, we can compare the scan data (point cloud or polygonal model) versus the part CAD model. In this comparison, we can see the measurement

One of the services that we provide at Precision Measurement and Design is to reverse engineer parts and create solid models to remanufacture the parts. The photo shows different tooling blocks of progressive dies. We 3D scanned the blocks and created the 3D solid models form the scanned data.

There are parts with no checking fixture that require to be CMM. For these projects, With our fixture plate, standoff fixtures, and adjustable clamps, we make a very consistent and repeatable setup to perform the measurement. The fixtures we have also help us to get access the parts datums and all the features that require

  Precision Measurement and Design provides off-line CMM programming to all manufacturing industries and metrology labs. We create CMM programs based on the math data or the 2D drawing of your products and we deliver the right version of the program which will be compatible to your CMM. We will also set up and run

  Precision Measurement and Design provides CAD design for CMM fixtures to different industries such as automotive and aerospace. Our design services are not limited to CMM fixtures. We accept design projects for any 3D modeling design, mechanical assemblies, generative design, product design and development, FEA simulation, and creating toolpath (CAM). Contact us today to

  – We program and measure automotive components for 1st off, in process, and last off inspection.– We provide all necessary dimensional reports and measurements roadmap for your PPAP. – We do R&R study on the fixtures to check gage repeatability and reproducibility.– We perform Capability studies (Statistical Process Control or SPC) to illustrate by

We provide on-site CMM programming and measurements if you have the CMM but no one to operate it. #cmm#measurement#fca#onsite#programming#metrology

Precision Measurement and Design provides reverse engineering services for tool and die, automotive components, aircraft parts, and etc. We not only reverse engineer parts but also create a 3D model using point cloud and have the design ready for re-manufacturing purposes. Reverse engineering can be done on both 2D and 3D profiles with simple or

We do off-site and on-site CMM programming compatible to your CMM. We will also run the program at your facility to assure the functionality of the program at no extra cost. #cmm #pc-dmis #cmm programming

Precision Measurement and Design provides measurement and certification for all different types of checking fixtures. Either you can ship the fixture to our lab located at Markham, Ontario or we can come to your site to perform the measurement and certify the fixture. #fixtures #calibrate #engineering #design

DMIS code is the CMM language that we use in order to communicate with our CMM. With DMIS programming, we will be able to move CMM’s probe to certain coordinates in our CMM’s work volume and perform measurement on manufactured parts. Below is an article about DMIS coding written by Steve Horsfall which will introduce

Checking fixtures are designed for accuracy, repeatability and reliability with a strong focus on operator ergonomics. The checking fixture is a convenient tool used by industrial production companies to control the dimensions of auto parts (such as trim edge,surface profile , hole size, flatness, etc.), it is suitable for mass production of parts detection. Different

As computer-aided design (CAD) has become more popular, reverse engineering has become a viable method to create a 3D virtual model of an existing physical part for use in 3D CAD, CAM, CAE or other software. The reverse-engineering process involves measuring an object and then reconstructing it as a 3D model. We can measure the

We use Geometric Dimensioning and Tolerancing in parts and assemblies drawings to define the theoretical (nominal) value of each geometrical feature and the allowable tolerances (variation) between those features. That is to say, there are different standards that we use for GD&T. The standard that we work with, at Precision Measurement and Design, is ASME